View CPH3116_25756.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN6405A
PNP/NPN Epitaxial Planar Silicon Transistors
CPH3116/CPH3216
DC/DC Converter Applications
Applications
* Relay drivers, lamp drivers, motor drivers.
Package Dimensions
unit:mm 2150A
[CPH3116/CPH3216]
0.4 3 2.9
Features
* Adoption of MBIT processes. * Large current capacitance. * Low collector-to-emitter saturation voltage. * High-speed switching. * Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). * High allowable power dissipation.
0.6
0.05
1 1.9
2
0.2
0.6
1.6
2.8
Specifications
( ) : CPH3116 Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg
Mounted on a ceramic board (600mm2x0.8mm)
1 : Base 2 : Emitter 3 : Collector SANYO : CPH3
Conditions
0.7 0.9
Ratings (-50)80 (-50)80 (-)50 (-)5 (-)1.0 (-)3 (-)200 0.9 150 -55 to +150
0.2
0.15
Unit V V V V A A mA W
C C
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(-)40V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)100mA VCE=(-)10V, IC=(-)300mA VCB=(-)10V, f=1MHz 200 420 (9)6 Conditions Ratings min typ max (-)0.1 (-)0.1 560 MHz pF Unit A A
Marking : CPH3116 : AR, CPH3216 : CR
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
83100TS (KOTO)/21000TS (KOTO) TA-2706 No.6405-1/5
CPH3116/CPH3216
Continued from preceding page.
Parameter Collector-to-Emitter Saturation Voltage Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat)1 VCE(sat)2 VBE(sat) Conditions IC=(-)500mA, IB=(-)10mA IC=(-)300mA, IB=(-)6mA IC=(-)500mA, IB=(-)10mA (-50) 80 (-)50 80 (-)50 (-)5 35 (170) 330 (30)40 Ratings min typ (-280) 130 (-145) 90 (-)0.81 max (-430) 190 (-220) 135 (-)1.2 Unit mV mV mV mV V V V V V V V ns ns ns ns
V(BR)CBO IC=(-)10A, IE=0 V(BR)CES IC=(-)100A, RBE=0
V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO IE=(-)10A, IC=0 ton tstg tf See specified test circuit. See specified test circuit. See specified test circuit.
Switching Time Test Circuit
PW=20s D.C.1% Input VR 50 + 100F + 470F IB1 IB2
(For PNP, the polarity is reversed.)
RB
RL
-5V 25V 20IB1= -20IB2= IC=500mA
--1000
IC -- VCE
CPH3116
--5 0 mA
0 --4
mA
--30
mA
1000
IC -- VCE
40mA 30mA
m --20
A
800
Collector Current, IC - A
Collector Current, IC - A
--800
A --10m --8mA --6mA
20mA
10mA 8mA
50mA
6mA
--600
--4mA
--2mA
600
4mA
2mA
--400
400
--200
200
0 0 --0.2 --0.4 --0.6 --0.8
IB=0
--1.0 IT01643
0 0
CPH3216
0.2 0.4 0.6 0.8
IB=0
1.0 IT01644
Collector-to-Emitter Voltage, VCE - V
--1.0 --0.9 --0.8
Collector-to-Emitter Voltage, VCE - V
1.0 0.9 0.8
IC -- VBE
CPH3116 VCE=--2V Collector Current, IC - A
IC -- VBE
CPH3216 VCE=2V
Collector Current, IC - A
--0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT01645
0.7 0.6 0.5 0.4 0.3
C 25C --25C
Ta=7 5
0.1 0 0 0.2 0.4
Ta=7 5
0.6
0.2
C 25C --25C
0.8
1.0
1.2 IT01646
Base-to-Emitter Voltage, VBE - V
Base-to-Emitter Voltage, VBE - V
No.6405-2/5
CPH3116/CPH3216
1000 7 5 3 2
hFE -- IC
CPH3116 VCE=--2V
1000 7 5 3 2
hFE -- IC
Ta=75C CPH3216 VCE=2V
Ta=75C
DC Current Gain, hFE
DC Current Gain, hFE
--25C
25C
--25C
25C
100 7 5 3 2
100 7 5 3 2
10 --0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
10 0.01
2
3
5
7
0.1
2
3
5
7
1.0
2
3
Collector Current, IC - A
5 3
IT01647 5 3
Collector Current, IC - A
IT01648
f T -- IC
Gain-Bandwidth Product, f T - MHz
CPH3116 VCE=--10V
f T -- IC
Gain-Bandwidth Product, f T - MHz
2
2 1000 7 5 3 2 100 7 5 3
CPH3216 VCE=10V
1000 7 5 3 2 100 7 5 3 2 --0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
3
2 0.01
2
3
5
7
0.1
2
3
5
7
1.0
2
3
Collector Current, IC - A
100 7
IT01649 100 7
Cob -- VCB
Collector Current, IC - A
IT01650
Cob -- VCB
CPH3216 f=1MHz
CPH3116 f=1MHz
Output Capacitance, Cob - pF
3 2
Output Capacitance, Cob - pF
5
5 3 2
10 7 5 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 IT01651
10 7 5 3 2 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 IT01652
Collector-to-Base Voltage, VCB - V
--1.0 7
VCE(sat) -- IC
Collector-to-Base Voltage, VCB - V
1.0
VCE(sat) -- IC
Collector-to-Emitter Saturation Voltage, VCE(sat) - V
5 3 2
Collector-to-Emitter Saturation Voltage, VCE(sat) - V
CPH3116 IC / IB=20
7 5 3 2
CPH3216 IC / IB=20
--0.1 7 5 3 2
0.1 7 5 3 2
Ta
C =75
C --25
C 25
7 Ta=
5C
C 25
C --25
2 3 5 7 0.1
--0.01 --0.01
2
3
5
7
--0.1
2
3
5
Collector Current, IC - A
--1.0 IT01653
7
0.01 0.01
2
3
5
Collector Current, IC - A
7 1.0 IT01654
No.6405-3/5
CPH3116/CPH3216
--1.0 7
VCE(sat) -- IC
CPH3116 IC / IB=50
1.0 7
VCE(sat) -- IC
CPH3216 IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE(sat) - V
3 2
Collector-to-Emitter Saturation Voltage, VCE(sat) - V
5
5 3 2
--0.1 7 5 3 2
7 Ta=
--25 C
5C
0.1 7 5 3 2
25
C
75C Ta=
--25
C
25
C
--0.01 --0.01
2
3
5
7
--0.1
2
3
5
Collector Current, IC - A
--10 7
--1.0 IT01655
7
0.01 0.01
2
3
5
7
0.1
2
3
5
Collector Current, IC - A
10
7 1.0 IT01656
VBE(sat) -- IC
CPH3116 IC / IB=50
VBE(sat) -- IC
CPH3216 IC / IB=50
7
Base-to-Emitter Saturation Voltage, VBE(sat) - V
Base-to-Emitter Saturation Voltage, VBE(sat) - V
5 3 2
5 3 2
--1.0 7 5 3 2
Ta= --25C 75C 25C
1.0 7 5 3 2
Ta= --25C 75C 25C
--0.1 --0.01
2
3
5
7
--0.1
2
3
5
Collector Current, IC - A
10 7 5
--1.0 IT01657
7
0.1 0.01
2
3
5
7
0.1
2
3
5
Collector Current, IC - A
1.4
7 1.0 IT01658
ASO
CPH3116/CPH3216
PC -- Ta
CPH3116/CPH3216
1.0 7 5 3 2 0.1 7 5 3 2
IC=1A
Collector Dissipation, PC - W
Collector Current, IC - A
3 2
ICP=3A
1.2
10 s 0 s 0 50
1m
1.0 0.9 0.8
s
M
ou
10
10 DC 0m s op er ati on
Ta=25C Single pulse
m
nte
s
do
na
ce
0.6
ram
ic
bo
ard
0.4
(60
0m
m2 x0
Mounted on a ceramic board(600mm2x0.8mm)
0.2 0
.8m
m)
160
0.01 0.1
For PNP, minus sign is omitted.
2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100
0
20
40
60
80
100
120
140
Collector-to-Emitter Voltage, VCE - V
IT01659
Ambient Temperature, Ta - C
IT01660
No.6405-4/5
CPH3116/CPH3216
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of August, 2000. Specifications and information herein are subject to change without notice.
PS No.6405-5/5

▲Up To Search▲

Price & Availability of CPH3116

	To Download CPH3116 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .